CNC turning
From Swiss-type bar work up to Ø42 mm to Ø670 × 1,512 mm shafts, with driven tools, Y axis and twin spindles so most parts leave the lathe finished.
- 20 turning machines
- C and Y axis
- 5 twin-spindle centres
- Ø670 × 1,512 mm max
At a glance
- Two multitasking turn-mill centres with B axis, to Ø670 × 1,512 mm
- 5 twin-spindle centres with C and Y axis (DMG Mori NLX 2500, Tsugami M08SYE-II)
- One Y-axis centre and two C-axis centres with driven tools
- Six 2-axis centres for straightforward turned work, plus a universal lathe
- 2 Swiss-type lathes for long, slender bar parts to Ø42 mm
Why C and Y axis matter
A C axis lets the lathe mill and drill on the face and circumference, a Y axis adds off-centre features, and a twin spindle finishes the back in the same cycle.
The result: fewer setups, no tolerance stack-up from re-clamping and shorter lead times. Cross-drilled, flatted and keywayed turned parts gain the most.
Turning centres in pictures
-
DMG Mori NTX 2000 | 1500
Multitasking turn-mill centre, B axis · 2024
- Control
- CELOS / Fanuc
- Working envelope / capacity
- Ø670 × 1,512 mm workpiece · X, Y, Z, B, C travel 670 × 1,538 × 300 mm × 240° × 330 mm
- Spindle
- 5,000 rpm
- Note
- B-axis simultaneous turn-mill
-
Mazak Integrex i-300 U1500
Multitasking turn-mill centre, B axis · 2014
- Control
- Mazatrol Matrix 2
- Working envelope / capacity
- Ø660 × 1,520 mm · X, Y, Z, B, C (660 × 1,520 × 210 × 240° × 330 mm)
- Spindle
- 4,000 rpm
- Verified accuracy
- Positioning 11 µm · repeatability 4 µm · indexing 0.0001° · workpiece to Ø600 × 1,500 mm
-
Tsugami M08SYE-II
CNC turning centre, C/Y axis, twin spindle · 2024
- Control
- Fanuc
- Working envelope / capacity
- Ø221 × 400 mm · X, Y, Z, A
- Spindle
- 4,500 rpm
- Note
- Twin spindle, bar loader
-
DMG Mori T2
CNC turning centre, C axis, driven tooling · 2023
- Control
- Siemens Sinumerik One
- Working envelope / capacity
- 460 × 300 × 730 mm · X, Z, C
- Spindle
- 3,500 rpm
- Note
- Driven tooling
-
Goodway GLS-2800Y
CNC turning centre, C/Y axis · 2024
- Control
- Fanuc
- Working envelope / capacity
- 370 × 760 × 720 mm · X, Y, Z, C
- Spindle
- 3,500 rpm
- Note
- Y axis
-
Spinner TC800 LMC
CNC turning centre, C axis, driven tooling · 2014
- Control
- Siemens 840 D
- Working envelope / capacity
- 600 × 1,500 × 265 mm · X, Z, C
- Spindle
- 4,000 rpm
- Note
- Long shafts
-
Spinner TC600
CNC lathe, 2-axis · 2014
- Control
- Siemens 840 D
- Working envelope / capacity
- 450 × 600 mm · X, Z
- Spindle
- 5,000 rpm
-
VAN MR38-V8
Swiss-type sliding-headstock lathe · 2023
- Control
- Fanuc
- Working envelope / capacity
- Ø42 mm × 320 mm
- Note
- Sliding headstock
Turning centres
Show specificationsHide specifications
| Machine | Year | Control | Working envelope / capacity | Spindle | Qty |
|---|---|---|---|---|---|
| DMG Mori NTX 2000 | 1500Multitasking turn-mill centre, B axis2024 · CELOS / Fanuc · Ø670 × 1,512 mm workpiece · X, Y, Z, B, C travel 670 × 1,538 × 300 mm × 240° × 330 mm · 5,000 rpm | 2024 | CELOS / Fanuc | Ø670 × 1,512 mm workpiece · X, Y, Z, B, C travel 670 × 1,538 × 300 mm × 240° × 330 mm | 5,000 rpm | 1 |
| Mazak Integrex i-300 U1500Multitasking turn-mill centre, B axis2014 · Mazatrol Matrix 2 · Ø660 × 1,520 mm · X, Y, Z, B, C (660 × 1,520 × 210 × 240° × 330 mm) · 4,000 rpm | 2014 | Mazatrol Matrix 2 | Ø660 × 1,520 mm · X, Y, Z, B, C (660 × 1,520 × 210 × 240° × 330 mm) | 4,000 rpm | 1 |
| DMG Mori NLX 2500 | 1500CNC turning centre, C/Y axis, twin spindle2026 · CELOS / Mitsubishi · Ø260 × 1,345 mm · X, Y, Z, A · 4,000 rpm | 2026 | CELOS / Mitsubishi | Ø260 × 1,345 mm · X, Y, Z, A | 4,000 rpm | 1 |
| DMG Mori NLX 2500 | 700CNC turning centre, C/Y axis, twin spindle2025 · CELOS / Mitsubishi · Ø260 × 820 mm · X, Y, Z, A · 4,000 rpm | 2025 | CELOS / Mitsubishi | Ø260 × 820 mm · X, Y, Z, A | 4,000 rpm | 1 |
| Tsugami M08SYE-IICNC turning centre, C/Y axis, twin spindle2024 · Fanuc · Ø221 × 400 mm · X, Y, Z, A · 4,500 rpm | 2024 | Fanuc | Ø221 × 400 mm · X, Y, Z, A | 4,500 rpm | 1 |
| Tsugami M08SYE-IICNC turning centre, C/Y axis, twin spindle2022 · Fanuc · Ø221 × 400 mm · X, Y, Z, A · 4,500 rpm · 2 units | 2022 | Fanuc | Ø221 × 400 mm · X, Y, Z, A | 4,500 rpm | 2 |
| DMG Mori T2CNC turning centre, C axis, driven tooling2023 · Siemens Sinumerik One · 460 × 300 × 730 mm · X, Z, C · 3,500 rpm | 2023 | Siemens Sinumerik One | 460 × 300 × 730 mm · X, Z, C | 3,500 rpm | 1 |
| Goodway GLS-2800YCNC turning centre, C/Y axis2024 · Fanuc · 370 × 760 × 720 mm · X, Y, Z, C · 3,500 rpm | 2024 | Fanuc | 370 × 760 × 720 mm · X, Y, Z, C | 3,500 rpm | 1 |
| Spinner TC800 LMCCNC turning centre, C axis, driven tooling2014 · Siemens 840 D · 600 × 1,500 × 265 mm · X, Z, C · 4,000 rpm | 2014 | Siemens 840 D | 600 × 1,500 × 265 mm · X, Z, C | 4,000 rpm | 1 |
| Spinner TC600CNC lathe, 2-axis2014 · Siemens 840 D · 450 × 600 mm · X, Z · 5,000 rpm · 3 units | 2014 | Siemens 840 D | 450 × 600 mm · X, Z | 5,000 rpm | 3 |
| Spinner TC400CNC lathe, 2-axis2011 · Siemens 840 D · 200 × 515 mm · X, Z · 5,000 rpm · 2 units | 2011 | Siemens 840 D | 200 × 515 mm · X, Z | 5,000 rpm | 2 |
| Spinner TC52CNC lathe, 2-axis2005 · Siemens 810 D · 200 × 515 mm · X, Z · 5,000 rpm | 2005 | Siemens 810 D | 200 × 515 mm · X, Z | 5,000 rpm | 1 |
Machine list revision: 5 September 2025
Typical parts
- Transmission and drive shafts
- gear blanks (turned in-house before gear cutting)
- fasteners and connection elements
- valve and switchgear components
- bushings and spacers
Frequently asked questions
What is the largest diameter you can turn?
Ø670 mm with a length of 1,512 mm on the DMG Mori NTX 2000 | 1500 multitasking centre, and Ø660 × 1,520 mm on the Mazak Integrex i-300.
Do you have bar-fed production turning?
Yes. The twin-spindle Tsugami and DMG Mori NLX centres and the 2 Swiss-type lathes run from bar, which suits medium and high volumes.
Can you finish both ends of a part in one cycle?
Yes, on the 5 twin-spindle centres: the part transfers to the sub-spindle and the back end is machined in the same cycle.
Summary
- 20 CNC turning centres: 2 multitasking, 5 twin-spindle C/Y, 1 Y-axis, 2 C-axis and 6 two-axis.
- Largest turned part Ø670 × 1,512 mm; Swiss-type bar work to Ø42 mm × 320 mm.
- Driven tools, Y axis and sub-spindles finish most parts in one cycle.
- Gear blanks are turned in-house, so geared parts have no external blank supply.
- Siemens, Fanuc, Mitsubishi and Mazatrol controls.
Last updated:
Related pages
- Capabilities
Multitasking and Swiss-type
Turn-mill to Ø670 × 1,512 mm; Swiss-type bar work to Ø42 mm.
- Capabilities
Gear manufacturing
CNC hobbing to Ø260 mm and module 6, shaping and broaching, blanks turned in-house.
Send us your drawing.
STEP, IGES, DXF or PDF. Quotation within 2–15 business days, depending on size and complexity.